SHIMANO Brakes SM-SH56 SPD silver. for PDM9000/8000/647/545/540/424/520/505/A530/M324

Stoppers SM-SH56, for the SPD system, with the possibility of releasing the pedal from the pedal in several directions. Easy engagement of the stop in the pedal. Suitable for all SPD type pedals, mainly for MTB and trekking, from the basic model PDM505 to XTR. Supplied with clamping elements of the shoe stopper. These cleats are applicable to most SPD and Click-R type pedals.

Type: MTB, Total package weight: 99g, without play, SPD, silver, for PDM9100/9120/9000/8000/647/545/540/424/520/505/A530/M324, Material: Steel

Safety Notice
CAUTION
Information on installation, adjustment and replacement of products not found in the user manual will be provided to you at the place of purchase or distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- Do do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Before attempting to ride with these and the cleats (on the shoes), make sure you understand the operation of the lock/release mechanism of the pedals and the cleats (on the shoes). SPD pedals are designed to release only when needed. They are not designed to release automatically when you fall off the bike.
- Use only SPD shoes with this product. Other types of shoes may not release from the pedals or may release unexpectedly.
- Use only SHIMANO cleats and securely tighten the mounting screws to the shoes. Failure to tighten the screws securely may result in a fall where the cleats do not release.
- Before attempting to ride with these pedals and cleats, apply the brakes, then put one foot on the ground and practice engaging and releasing each cleat from the pedal until you can do it automatically with minimal effort.
- Ride on a flat surface first until you learn how to engage and release stops from the pedals.
- Before driving, adjust the holding force of the stops on the pedals according to your needs. If the holding force of the stop on the pedals is small, the stops may accidentally come loose, you may lose your balance, and you may fall off the bicycle. If the holding force of the stopper on the pedals is large, the stoppers may not be released easily.
- When driving at low speed or when there is a possibility that you will need to stop (e.g. when making a full turn, at an intersection, when driving uphill or turning a sharp corner), release the stoppers from the pedals in advance so that you can quickly put your feet on the ground if necessary.
- While riding in in adverse conditions, use less cleat holding force to attach pedal cleats.
- Keep cleats and binding free of dirt and debris to ensure proper fit and release.
- Remember to check cleat wear regularly. When the cleats are worn, replace them and adjust the holding force of the cleat before riding and after replacing the pedal cleats. If you do not heed the above warnings, the shoes may not slip out of the pedals when you want them to, or may slip off unexpectedly or accidentally, resulting in serious injury.
-If the reflectors are dirty or damaged, do not continue riding the bicycle. Otherwise, it will be difficult for oncoming vehicles to spot you.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html