SHIMANO Derailleur Cues RD-U6070 1x11-k. Di2 11-50z. Linkglide long strap Shadow RD

Designed for a combination of 1x11 gears with a cassette of 11-50 teeth. Total capacity: 39 teeth.
Only compatible with the LINKGLIDE shifting system. Cues components cannot be combined with any other SHIMANO set.
Recommended chains: CN-LG500, CN-HG601/HG701/HG901. Technologies used: Linkglide, Shadow RD.

Type: MTB, Total package weight: 634g, 11 speed, Arm type: GS-Long arm, Shadow RD+, Mounting type: Direct mount, Capacity: 39 teeth, black, Material: Aluminum / Steel

Safety notice
CAUTION
Installation, adjustment and replacement information for products that cannot be found in the user manual, they will be provided to you at the point of purchase or from the distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. Instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow instructions will result in death or serious injury.
WARNING - Failure to follow instructions could result in death or serious injury.
WARNING - Failure to follow instructions could result in personal injury or physical damage to the equipment and surroundings.

For items requiring replacement, contact your place of purchase or distributor.
Be sure to follow the instructions below to prevent burns and other injuries from liquid leakage, overheating, fire or explosion.

DANGER
- Use the designated charging cable when charging the battery. Use of any other items may cause fire, overheating, leakage, or damage to the connected PC.
- Avoid getting the charging cable wet and do not touch or hold it when it is wet or when your hands are wet. Failure to do so may result in operational problems or electric shock.
- Use an AC adapter with a USB port with a voltage of 5.0V DC and a current of at least 1.0A DC. If you use an adapter with a current rating of less than 1.0A, the AC adapter may heat up and cause fire, smoke, overheating, damage, electric shock, or burns.
- Do not heat the battery or expose it to fire. Failure to do so may cause the battery to burn or burst.
- Do not use or leave the battery in hot or humid places where the battery may be exposed to direct sunlight, in a closed vehicle on a hot day, or near a heater. Failure to do so may result in fire, burns, or other injuries due to leakage, overheating, or rupture.
- Do not deform, modify, or disassemble the battery. Also, do not apply solder directly to the battery terminals. Failure to do so may result in fire, burns, or other injuries due to leakage, overheating, or rupture.
- Do not touch the metal clips with metal objects such as hairpins. Failure to do so may result in short circuits, overheating, burns, or other injuries.

WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction, cause you to fall unexpectedly and seriously injure yourself.
- Always grasp the plug of the cable when connecting or disconnecting the USB cable or charging cable. Failure to do so may result in fire or electric shock.
- If the following symptoms occur, stop using the device and contact the place of purchase. A fire or electric shock may occur.
- If pungent-smelling smoke comes from the mains plug or the plug heats up. There may be a bad connection inside the power plug.
- If there is a buzzing sound while charging with the USB port AC adapter, do not touch the device, the bicycle or the AC adapter. If struck by lightning, electric shock may occur.
- Do not use a USB hub to connect the cable to the USB port of the PC. Charging failure or fire may occur due to overheating.
- Be careful not to damage the charging cable. Do not damage, modify, forcefully bend, twist or stretch it, place it near hot objects, place heavy objects on it, or tie it tightly together. If used in a damaged condition, fire, electric shock or short circuit may occur.
- If the battery is not fully charged after 4 hours of charging, stop charging. Failure to do so may result in fire, cracking, ignition or overheating.
- Do not immerse the product in fresh or sea water and prevent the terminals from getting wet. Failure to do so may result in fire, bursting, ignition or overheating.
- Do not subject the product to strong impact or throw it. Failure to do so may result in cracking, overheating, or problems during operation.
- Do not use the battery if it shows liquid leakage, discoloration, deformation, or other unusual signs. Failure to do so may result in cracking, overheating or problems during operation.
- Regularly clean the chain and the QUICK-LINK with a suitable chain cleaner. The intervals between maintenances depend on the circumstances of use and driving. Never use alkaline or acid-based solvents such as rust removers. If such a solvent is used, the chain or QUICK-LINK may break and cause serious injury.
- Check the chain for damage (deformation or cracking), skipping or any other irregularities such as erratic gear shifting. If any problems occur, please contact the place of purchase or distributor. The chain may break and you may fall.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html