Description
Hydraulic disc brake M9100. Composed of BLM9100 brake lever and BRM9100 caliper without adapter, connected by BH90-SS hose. Plates-resin K03TI.
Technologies used: One Way Bleeding, Servowave, I-Spec EV
Type: MTB, Total package weight: 692g, Front, black, One Way Bleeding, Hose length: 1000mm, Mounting: On the sleeve, Post Mount, Material: Aluminum / Steel
After 27 years of development, we are right where it all started: at components specially developed for mountain bike racing. They are designed to meet the most demanding requirements with unbeatable driving characteristics. The new XTR M9100 brings the most versatile kit designed for XC, Enduro and Marathons.
Safety notice
CAUTION
Information on installation, adjustment and replacement of products not found in the user manual will be provided to you at the place of purchase or distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.
WARNING
- Because each bicycle may handle slightly differently depending on the model, learn proper braking techniques (including brake lever pressure and bicycle handling characteristics) and the operation of your bicycle. Improper use of the bicycle's braking system may result in loss of control or a fall, which could lead to serious injury.
- Do not disassemble or modify the product. It may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Downhill cycling and freeriding are dangerous activities in themselves. It is strongly recommended that riders use head and body protection and carry out thorough safety inspections of their bikes before cycling. Remember that you drive at your own risk and therefore you should consider your experience and abilities very carefully. There is a risk that you may be involved in an accident resulting in serious injury or even death.
- Before riding a bicycle, drivers must get used to the higher performance of this brake.
- The brake system is designed for downhill and freeride cycling, and its braking power is much higher than other brakes. If you do not familiarize yourself with the performance level of this brake, you may be involved in an accident that may result in serious injury or even death. In addition, the brake settings do not allow driving on city streets. Sudden braking can cause the bike to fall forward, resulting in serious injury or even death.
- 203mm and 180mm disc brake rotors provide more stopping power than 160mm disc brake rotors. If you ride a bicycle without thoroughly familiarizing yourself with the braking characteristics, braking may result in you falling off the bicycle, possibly resulting in serious injury or death.
- In addition, be very careful and keep your fingers away from the rotating disc brake rotor. The disc brake rotor is sharp enough to cause serious injury to fingers if fingers become caught in the openings of the moving rotor.
- Do not touch the calipers or disc brake rotor while riding or immediately after dismounting the bicycle. During braking, the disc brake calipers and rotor become hot, so if you touch them, you can burn yourself.
- Be careful not to get oil or grease on the disc brake rotor and brake pads. Riding a bicycle with oil or grease on the disc brake rotor and brake pads may cause the brakes to malfunction and lead to serious injury due to a fall or crash.
- Check the thickness of the brake pads and do not use them if they are 0.5mm or less. This may cause the brakes to malfunction and lead to serious injury.
- Do not use the disc brake rotor if it is cracked or deformed. The disc brake rotor can break and lead to serious injury from a fall. Replace the disc brake rotor with a new one.
- Do not use the disc brake rotor if its thickness is 1.5 mm or less. Also, do not use it if the aluminum surface is visible. The disc brake rotor can break and lead to serious injury from a fall. Replace the disc brake rotor with a new one.
- Do not use the brakes continuously. This can cause a sudden increase in brake lever action, causing the brakes to malfunction and lead to serious injury.
- Do not use the brakes if there is a fluid leak. This can cause the brakes to malfunction and lead to serious injury.
- Do not use the front brake too hard. If you do this, the front wheel may lock up and the bicycle may tip forward and cause serious injury.
- Since the required braking distance will be longer in wet weather, reduce your speed. Apply the brakes early and gently. You may fall or crash and be seriously injured.
- Wet road surfaces can cause tires to lose traction. To avoid this, reduce your speed and apply the brakes early and gently. If the tires lose traction, you may fall and be seriously injured.
WARNING
т- Warnings about genuine SHIMANO mineral oil
- When handling, use appropriate eye protection and avoid eye contact. In case of eye contact, flush the eye with clean water and seek medical attention immediately. Contact with eyes may cause irritation.
- Use protective gloves during handling. In case of contact with the skin, wash it properly with soap and water. Skin contact may cause rashes and discomfort.
- Protect your nose and mouth with a protective breathing mask and use in a well-ventilated room. Inhalation of mineral oil vapors or vapors may cause nausea.
- After inhaling mineral oil vapors or vapors, move to a place with fresh air. Cover yourself with a blanket. Stay warm in a stable position and seek professional medical attention immediately.
З Warm-up time
- Disc brakes have a certain warm-up time, and braking power gradually increases with increasing warm-up time. Be sure to avoid any such increases in braking force while using the brakes during the warm-up period. The same situation occurs when replacing brake pads or disc brake rotor.
Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html
Technologies used: One Way Bleeding, Servowave, I-Spec EV
Type: MTB, Total package weight: 692g, Front, black, One Way Bleeding, Hose length: 1000mm, Mounting: On the sleeve, Post Mount, Material: Aluminum / Steel
After 27 years of development, we are right where it all started: at components specially developed for mountain bike racing. They are designed to meet the most demanding requirements with unbeatable driving characteristics. The new XTR M9100 brings the most versatile kit designed for XC, Enduro and Marathons.
Safety notice
CAUTION
Information on installation, adjustment and replacement of products not found in the user manual will be provided to you at the place of purchase or distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.
WARNING
- Because each bicycle may handle slightly differently depending on the model, learn proper braking techniques (including brake lever pressure and bicycle handling characteristics) and the operation of your bicycle. Improper use of the bicycle's braking system may result in loss of control or a fall, which could lead to serious injury.
- Do not disassemble or modify the product. It may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Downhill cycling and freeriding are dangerous activities in themselves. It is strongly recommended that riders use head and body protection and carry out thorough safety inspections of their bikes before cycling. Remember that you drive at your own risk and therefore you should consider your experience and abilities very carefully. There is a risk that you may be involved in an accident resulting in serious injury or even death.
- Before riding a bicycle, drivers must get used to the higher performance of this brake.
- The brake system is designed for downhill and freeride cycling, and its braking power is much higher than other brakes. If you do not familiarize yourself with the performance level of this brake, you may be involved in an accident that may result in serious injury or even death. In addition, the brake settings do not allow driving on city streets. Sudden braking can cause the bike to fall forward, resulting in serious injury or even death.
- 203mm and 180mm disc brake rotors provide more stopping power than 160mm disc brake rotors. If you ride a bicycle without thoroughly familiarizing yourself with the braking characteristics, braking may result in you falling off the bicycle, possibly resulting in serious injury or death.
- In addition, be very careful and keep your fingers away from the rotating disc brake rotor. The disc brake rotor is sharp enough to cause serious injury to fingers if fingers become caught in the openings of the moving rotor.
- Do not touch the calipers or disc brake rotor while riding or immediately after dismounting the bicycle. During braking, the disc brake calipers and rotor become hot, so if you touch them, you can burn yourself.
- Be careful not to get oil or grease on the disc brake rotor and brake pads. Riding a bicycle with oil or grease on the disc brake rotor and brake pads may cause the brakes to malfunction and lead to serious injury due to a fall or crash.
- Check the thickness of the brake pads and do not use them if they are 0.5mm or less. This may cause the brakes to malfunction and lead to serious injury.
- Do not use the disc brake rotor if it is cracked or deformed. The disc brake rotor can break and lead to serious injury from a fall. Replace the disc brake rotor with a new one.
- Do not use the disc brake rotor if its thickness is 1.5 mm or less. Also, do not use it if the aluminum surface is visible. The disc brake rotor can break and lead to serious injury from a fall. Replace the disc brake rotor with a new one.
- Do not use the brakes continuously. This can cause a sudden increase in brake lever action, causing the brakes to malfunction and lead to serious injury.
- Do not use the brakes if there is a fluid leak. This can cause the brakes to malfunction and lead to serious injury.
- Do not use the front brake too hard. If you do this, the front wheel may lock up and the bicycle may tip forward and cause serious injury.
- Since the required braking distance will be longer in wet weather, reduce your speed. Apply the brakes early and gently. You may fall or crash and be seriously injured.
- Wet road surfaces can cause tires to lose traction. To avoid this, reduce your speed and apply the brakes early and gently. If the tires lose traction, you may fall and be seriously injured.
WARNING
т- Warnings about genuine SHIMANO mineral oil
- When handling, use appropriate eye protection and avoid eye contact. In case of eye contact, flush the eye with clean water and seek medical attention immediately. Contact with eyes may cause irritation.
- Use protective gloves during handling. In case of contact with the skin, wash it properly with soap and water. Skin contact may cause rashes and discomfort.
- Protect your nose and mouth with a protective breathing mask and use in a well-ventilated room. Inhalation of mineral oil vapors or vapors may cause nausea.
- After inhaling mineral oil vapors or vapors, move to a place with fresh air. Cover yourself with a blanket. Stay warm in a stable position and seek professional medical attention immediately.
З Warm-up time
- Disc brakes have a certain warm-up time, and braking power gradually increases with increasing warm-up time. Be sure to avoid any such increases in braking force while using the brakes during the warm-up period. The same situation occurs when replacing brake pads or disc brake rotor.
Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html
More from category
Additional information
| Category: | Disc brake sets |
| Purpose: | MTB |
| Technology: | Hydraulic |
| Location: | Front |
| Installation: | Post Mount |
