SHIMANO Wheels WH-RS300 C24 casing 10/11-k. black

Set of road wheels. Also suitable for tubeless tires. Balanced ratio between aerodynamics and stiffness. Wider rims increase comfort and reliability. Easy maintenance.

Type: ROAD, Total package weight: 2180g, Diameter: 622C, Mounting method: Quick release, Front / Rear, Packed per: pair, For V-brakes, Compatible with cassettes: 10/11 speed, Rim height: C24, Rim width: 23.2mm, O.L.D.: QR (100mm / 130mm), black, Material: Aluminum

Safety Notice
CAUTION
Information on installation, adjustment and replacement of products not found in the user manual will be provided at the place of purchase or distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- Before use, check the wheels to make sure that the spokes are not bent or loose and that there are no nicks, scratches or cracks in the surface of the rim. If you notice any of these problems, do not use the wheel. The wheel may break and you may fall.
- For carbon wheels, check that the carbon is not peeling or cracking.
- If the quick release mechanism is not used correctly, the wheel may fall off the bike and result in serious injury. Please read the Quick Release Mechanism Service Instructions carefully before use.
- If the wheels are used in harsh conditions, such as on unpaved surfaces, they may be bent or damaged, resulting in an accident.
- Before riding the bicycle, check that the wheels are securely fastened. Improper use of the quick release lever can cause the wheel to fall off, etc. and may result in serious injury from falling.
- After reading the user manual carefully, keep this manual in a safe place for possible future use.
Wheel with rim/tubeless wheel
- The hole on the opposite side of the valve hole is an indicator of the amount of wear on the rim. If this hole is no longer visible, stop using the rim.
If you continue to use the rim, it may break, the bike may fall and result in an accident.
Inner wheel
- Before riding, check that the tires are securely attached to the rims. If the tires fall off while riding, you may fall and suffer serious injury.
- If the braking surfaces of the carbon fiber rims are excessively worn and the rims are deformed, stop riding the bicycle. If you continue to ride the bike in this condition, it may tip over and result in serious injury.
-This bike is equipped with a quick-release hub for easy installation and removal.
-Failure to properly install this quick release hub (wheel) on the bicycle may cause the wheel to detach from the bicycle while riding, resulting in serious bodily injury.
- Use a front fork equipped with a wheel retention mechanism.

WARNING
- Tires must be inflated to the pressure marked on the tire before use.
- Be aware that a taller rim is more affected by side effects. winds and causes riding instability.
- If you use a defect repair agent, contact the place of purchase or the bicycle dealer.
- Only tighten and loosen the quick release lever with your hands. Never use any tools to tighten the quick release lever, e.g. hammer as damage may occur.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html