SHIMANO Wheel WH-RS171 700C rear 12mm thru axle 10/11-k. Center-Lock black

RS171 rear wheel with 12mm E-Thru fixed axle. The wider rim 19C is suitable for tires 622-28 to 45mm. Holder for Center Lock disc. Hub width: O.L.D. 142mm.

Type: GRAVEL, Total package weight: 1150g, Diameter: 622C, Mounting method: Fixed axle, Rear, Packed by: pcs, For Center Lock, Compatible with cassettes: 10/11 speed, Rim height: 19, Rim width: 24.6mm, O.L.D.: R12mm (142mm), Material: Aluminum

Safety Notice
CAUTION
Information on installation, adjustment and replacement of products not found in the user manual will be provided at the place of purchase or distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- Do do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. Improper use of the axle release lever can cause the wheel to fall off, etc. and may result in serious injury from a fall or collision.
- Use the appropriate air pressure marked on the tire and rim. If the maximum pressure is indicated on the tires or rims, do not exceed the maximum pressure with the lower value.
- Before riding the bicycle, check the wheels to make sure that the spokes are not bent or loose and that there are no nicks, scratches or cracks on the surface of the rim. If you notice any of these problems, do not use the wheel. The wheel can break and you can fall. Check that there is no peeling or cracking of the carbon.
- Do not use the road wheel assembly on unpaved surfaces. The set of road wheels is intended for paved surfaces. If the wheels are used on unpaved surfaces, they may be bent or damaged, resulting in an accident.
- Do not use with rim brakes. These wheels are designed exclusively for use with disc brakes. Using these wheels with rim brakes can damage the rims and cause an accident that could result in serious injury or even death.
- Check that the axle release lever does not interfere with the disc brake rotor even when it is fully engaged. If the axle release lever is on the side of the disc brake rotor, it can interfere with the disc brake rotor, which is dangerous. If the axle release lever interferes with the disc brake rotor, stop using it immediately and contact your place of purchase or distributor.
- For details on the E-THRU axle, refer to the E-THRU axle user manual. F12 (front 12mm axle), R12 (rear 12mm axle) wheel (hub axle)
- This wheel can only be used in combination with a special front fork/frame and hub axle. If used in combination with any other front fork/frame or hub axle, the wheel may detach from the bicycle while riding, resulting in serious personal injury.
Galus wheel
- Before riding the bicycle, check that the tires are securely attached to the rims. If the tires fall off while riding, you may fall and be seriously injured.

WARNING
- Please note that a taller rim is more easily affected by the wind and causes driving instability.
Warm-up time
- Disc brakes have a certain warm-up time, and the braking power gradually increases with the increasing warm-up time. Make sure you are aware of such increases. Otherwise, you may lose control of the bike, fall and seriously injure yourself. The same situation occurs when replacing brake pads or disc brake rotor.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html