SHIMANO Adapter SM-RTAD05 from centerlock to 6 holes

Brake disc adapter. Use the adapter to change the hub mount from Center Lock to 6-hole.

Type: MTB, Total package weight: 63g, Front / Rear, black, Packed by: pcs, Mount type: Post Mount, Material: Aluminum

Safety notice
WARNING
Information about installation, adjustment and replacement of products not found in the user manual, they will provide you at the point of purchase or at the distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- Because each bicycle may handle slightly differently depending on the model, learn proper braking techniques (including brake lever pressure and bicycle handling characteristics) and the operation of your bicycle. Improper use of the bicycle's braking system may result in loss of control, which may result in serious injury from a fall or collision.
- Do not disassemble or modify the product. It may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, drivers must get used to the higher performance of this brake. 203mm and 180mm disc brake rotors provide more stopping power than 160mm disc brake rotors. If you ride a bicycle without thoroughly familiarizing yourself with the braking characteristics, braking may result in you falling off the bicycle, possibly resulting in serious injury or death.
- In addition, be very careful and keep your fingers away from the rotating disc brake rotor. The disc brake rotor is sharp enough to cause serious injury to fingers if fingers become caught in the openings of the moving rotor.
- Do not touch the calipers or disc brake rotor while riding or immediately after dismounting the bicycle. During braking, the calipers and disc brake rotor become hot, so if you touch them, you can burn yourself.
- Do not allow oil or grease to get on the disc brake rotor and brake pads. Riding a bicycle with oil or grease on the brake shoes may cause the brakes to malfunction and lead to serious injury due to a fall or crash.
- Check the thickness of the brake pads and do not use them if they are 0.5mm or less. This may cause the brakes to malfunction and lead to serious injury from a fall or collision.
- Do not use the disc brake rotor if it is cracked or deformed. The disc brake rotor can break and lead to serious injury from a fall. Replace the disc brake rotor with a new one.
- Do not use the disc brake rotor if its thickness is 1.5 mm or less. Also, do not use it if the aluminum surface is visible. The disc brake rotor can break and lead to serious injury from a fall. Replace the disc brake rotor with a new one.
- Do not use the front brake too hard. If you do this, the front wheel may lock up and the bicycle may tip forward and cause serious injury.
- Since the required braking distance will be longer in wet weather, reduce your speed. Apply the brakes early and gently. You may fall or crash and be seriously injured.
- Wet road surfaces can cause tires to lose traction. To avoid this, reduce your speed and apply the brakes early and gently. If the tires lose traction, you may fall and be seriously injured.
Hydraulic Disc Brake Warnings
- Do not use the brakes continuously. This can cause a sudden increase in brake lever action, causing the brakes to malfunction and lead to serious injury from a fall or collision.
- Do not use the brakes if fluid has leaked. This can cause the brakes to malfunction and lead to serious injury from a fall or crash.
Warnings for Mechanical Disc Brakes
- Do not use a brake cable if it is rusted, frayed or cracked. This can cause the brakes to malfunction and lead to serious injury from a fall or collision.

WARNING
Disc brakes have a certain warm-up time and braking power increases gradually as the warm-up time increases. Losing control of the bicycle may result in accidents or falls resulting in serious injury. The same situation occurs when replacing brake pads or disc brake rotor.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html