SHIMANO Brake hydraulic E-MT501 BL-MT501/BR-M520 front black Post Mount 1000mm snake. + D03S

on the model, learn proper braking techniques (including brake lever pressure and bicycle handling characteristics) and the operation of your bicycle. Improper use of the bicycle's braking system may result in loss of control or a fall, which could lead to serious injury.
- Do not disassemble or modify the product. It may cause the product to malfunction, you may fall unexpectedly and get seriously injured.
- Riders must get used to the higher performance of this brake before riding the bike.
- The brake system is designed for E-MTB bikes. Its braking power is much higher than other brakes. If you ride a bicycle without thoroughly familiarizing yourself with the braking characteristics, braking may result in you falling off the bicycle, possibly resulting in serious injury or death. In addition, the brake settings do not allow driving on city streets. Sudden braking can cause the bike to fall forward, resulting in serious injury or even death.
- 203mm and 180mm disc brake rotors provide more stopping power than 160mm disc brake rotors. If you ride a bicycle without thoroughly familiarizing yourself with the braking characteristics, braking may result in you falling off the bicycle, possibly resulting in serious injury or death.
- In addition, be very careful and keep your fingers away from the rotating disc brake rotor. The disc brake rotor is sharp enough to cause serious injury to fingers if fingers become caught in the openings of the moving rotor.
- Do not touch the calipers or disc brake rotor while riding or immediately after dismounting the bicycle. During braking, the disc brake calipers and rotor become hot, so if you touch them, you can burn yourself.
- Be careful not to get oil or grease on the disc brake rotor and brake pads. Riding a bicycle with oil or grease on the disc brake rotor and brake pads may cause the brakes to malfunction and lead to serious injury due to a fall or crash.
- Check the thickness of the brake pads and do not use them if they are 0.5mm or less. This may cause the brakes to malfunction and lead to serious injury.
- Do not use the disc brake rotor if it is cracked or deformed. The disc brake rotor can break and lead to serious injury from a fall. Replace the disc brake rotor with a new one.
- Do not use the disc brake rotor if its thickness is 1.5 mm or less. Also, do not use it if the aluminum surface is visible. The disc brake rotor can break and lead to serious injury from a fall. Replace the disc brake rotor with a new one.
- Do not use the brakes continuously. This can cause a sudden increase in brake lever action, causing the brakes to malfunction and lead to serious injury.
- Do not use the brakes if there is a fluid leak. This can cause the brakes to malfunction and lead to serious injury.
- Do not use the front brake too hard. If you do this, the front wheel may lock up and the bicycle may tip forward and cause serious injury.
- Since the required braking distance will be longer in wet weather, reduce your speed. Apply the brakes early and gently. You may fall or crash and be seriously injured.
- Wet road surfaces can cause tires to lose traction. To avoid this, reduce your speed and apply the brakes early and gently. If the tires lose traction, you may fall and be seriously injured.

WARNING
т- Warnings about genuine SHIMANO mineral oil
- When handling, use appropriate eye protection and avoid eye contact. In case of eye contact, flush the eye with clean water and seek medical attention immediately. Contact with eyes may cause irritation.
- Use protective gloves during handling. In case of contact with the skin, wash it properly with soap and water. Skin contact may cause rashes and discomfort.
- Protect your nose and mouth with a protective breathing mask and use in a well-ventilated room. Inhalation of mineral oil vapors or vapors may cause nausea.
- After inhaling mineral oil vapors or vapors, move to a place with fresh air. Cover yourself with a blanket. Stay warm in a stable position and seek professional medical attention immediately.
З Warm-up time
- Disc brakes have a certain warm-up time, and braking power gradually increases with increasing warm-up time. Be sure to avoid any such increases in braking force while using the brakes during the warm-up period. The same situation occurs when replacing brake pads or disc brake rotor.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html