SHIMANO Rear hub FH-TX800 32d. for nuts 8/9/10-round black OEM

Rear hub TOURNEY TX800. Basic MTB rear hub designed for cassettes with 8/9 pinions, black color, 32 holes for spokes, OLD 135mm. Classic hub design with cones for smooth operation and easy service. Nuts included.

Type: MTB, Total package weight: 380g, 32 holes, Rear, black, 8/9 speed, Mounting method: Nuts, Material: Aluminum

SHIMANO TOURNEY represents a basic set of cycling components for all age groups with a wide range of uses. A stable system and long-lasting life for everyday commuting to work, spending free time with family and friends or sports outings. Smooth, light and precise shifting thanks to HYPERDRIVE technology. Attractive design and clear shift display, wider brake area for lower noise, excitement of sports driving. These are SHIMANO TOURNEY components.

Safety Notice
CAUTION
Information on installation, adjustment and replacement of products not found in the user manual will be provided at the place of purchase or distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- This wheel is equipped with a hub with a quick release that facilitates installation and removal. Failure to properly install this quick release (wheel) hub on the bicycle may cause the wheel to detach from the bicycle while riding resulting in serious personal injury.
- Use a front fork equipped with a wheel retention mechanism.
- CAREFULLY READ THE INSTRUCTIONS FOR THE QUICK RELEASE HUB IN THE OWNER'S MANUAL BEFORE USE. If you have any questions, ask your dealer. INCORRECT INSTALLATION OF THE HUB CAN RESULT IN SERIOUS PERSONAL INJURY.
- Before riding the bicycle, check that the wheels are securely fastened. Improper use of the quick release lever can cause the wheel to fall off, etc. and may result in serious injury from a fall.
- If the quick release mechanism is not used correctly, the wheel may fall off the bicycle and serious injury may result. Before use, carefully read the operating instructions for the quick release mechanism.

WARNING
Tighten and release the quick release lever only with your hands. Never use any tools to tighten the quick release lever, e.g. hammer as damage may occur.
Never tighten the wheel to the frame by turning the quick release lever as shown in the figure on the right. Simply rotating the lever in a circular motion will not tighten the wheel to the frame. Detachment of the wheel due to incorrect installation of the hub can result in serious personal injury.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html