LONGUS Stem SETUP adjustable 28.6/31.8 0-60°, black

Adjustable, 2D forged stem intended for Trekking and City bikes, where it is necessary to set a comfortable height of the handlebars. 4 screws ensure firm clamping of the handlebars. The inclination of the stem can be adjusted in the range of 0° to 60°.
Length: 110 mm
Inclination: 0°- 60°
Height: 35 mm
Fork neck: 1-1/8" (28.6 mm)
Handlebar: 1-1/4" (31.8 mm)
Weight: 265g (for handlebars 25.4mm)

Safety Notice
WARNING!
• Serious injury may occur if you do not follow the instructions.
• Replace the product and all related parts after an accident.
• Use the correct insert when installing on a 1" fork neck.
• Never apply grease to the clamping surfaces.
• Never tighten do not use a higher torque than that indicated on the product.
• Do not use this product in any application other than the category indicated on the packaging (for example: trekking, road racing, cyclocross, track, MTB, Downhill, Freeride, BMX).
IMPORTANT!
• Regularly check that the screws are tightened to the specified value.
• For 4 screws: always tighten in a cross and evenly.
• In the case of additional instructions such as angle adjustment (for adjustable stems), please follow the instructions in the user manual.

Manufacturer information
Manufacturer:
PAUL LANGE OSLANY, s.r.o.
Mierová 854/37, 972 47 Oslany, SLOVAK REPUBLIC
ID: 36306975, IČDPH: SK2020079875
Tel: +421 463 938 110, E-mail: info@paul-lange.sk, Web: paullange.sk