SHIMANO Connector EW-EN100 for E-bike

Clutch for Steps engine support mode without display. Bluetooth LE/ANT private wireless connection to third-party cycling computers and Smart phone applications.

Safety notice
CAUTION
For product installation, setup and replacement information not found in the user manual, please contact the point of purchase or distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING:
Do do not disassemble or modify the product. It may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
Riding Safety Precautions
- Before riding on busy streets, be thoroughly familiar with starting the bicycle with an electric assist motor. You may start the bike unexpectedly, causing an accident.
- Be careful not to catch parts of your clothing in the chain while riding. You may fall and be seriously injured.
- Do not touch the gears, sprockets and chain with your fingers.
- If they get caught in the drive train, you may seriously injure yourself.
- Before riding the bicycle, make sure that the front and rear lights can be turned on. bike, remove the battery and charging cable. Failure to do so may result in electric shock.
- Avoid touching the drive unit that has been in continuous use for a long time. The surface of the drive unit gets hot and contact with it can cause burns.
- Clean the chain regularly with a suitable chain cleaner. Maintenance intervals depend on usage and riding circumstances.
-Never use alkaline or acid-based solvents such as rust removers. If solvent is used, the chain may break and cause serious injury.
- When installing the product, follow the instructions given in the manuals.
- Use only original SHIMANO parts. If a component or replacement part is improperly mounted or adjusted, it may cause the component to fail and cause the rider to lose control of the bicycle and fall.

WARNING
Riding Safety Precautions
- Follow the instructions in the bicycle manual to ensure safe riding.
Safety Precautions
- Never modify the system. Otherwise, a system error may occur.
- Use the product under the supervision of a person responsible for safety and only according to instructions. Do not allow anyone (including children) with reduced physical, sensory or mental capabilities, or persons without experience or knowledge to use the product.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html