SHIMANO Brake pads SM-SH11 yellow with clearance for PD9000/6800/5800/R550/R540

Stops SM-SH11, for the SPD-SL system, with the possibility of rotating the treadle in the pedal at the level of 6°. The possibility of rotation is also available in the area of ​​the front and back of the stopper. They are yellow for better recognition. Suitable for all SPD-SL type pedals, from the basic model PDR540 to DURA-ACE. Suitable for cyclists who are already starting with the pedal system and need to have the freedom to move the foot in the pedal. Supplied with clamping elements of the shoe stopper. These cleats are supplied with all SPD-SL type pedals.

Type: ROAD, Total package weight: 104g, with 6 degrees of freedom of movement, SPD-SL, yellow, for PDR9100/R8000/R7000/9000/6800/5800/R550/R540, Material: Plastic

Safety notice
CAUTION
Information on installation, setup and replacement of products not found in the user manual will be provided to you at the place of purchase or distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- Do do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Before attempting to ride with these pedals and cleats (on shoes), make sure you understand the operation of the lock/release mechanism of the pedals and cleats (on shoes). SPD-SL pedals are designed to release only when needed. They are not designed to release automatically when you fall off the bike.
- Only use SPD-SL shoes with this product. Other types of shoes may not release from the pedals or may release unexpectedly.
- Use only SHIMANO cleats and securely tighten the mounting screws to the shoes. Failure to tighten the screws securely may result in a fall where the cleats do not release.
- Before attempting to ride with these pedals and cleats, apply the brakes, then put one foot on the ground and practice engaging and releasing each cleat from the pedal until you can do it automatically with minimal effort.
- Ride on a flat surface first until you learn how to engage and release stops from the pedals.
- Before driving, adjust the holding force of the stops on the pedals according to your needs. If the holding force of the stop on the pedals is small, the stops may accidentally come loose, you may lose your balance, and you may fall off the bicycle. If the holding force of the stopper on the pedals is large, the stoppers may not be released easily.
- When driving at low speed or when there is a possibility that you will need to stop (e.g. when making a full turn, at an intersection, when driving uphill or turning a sharp corner), release the stoppers from the pedals in advance so that you can quickly put your feet on the ground if necessary.
- While riding in in adverse conditions, use less cleat holding force to attach pedal cleats.
- Keep cleats and binding free of dirt and debris to ensure proper fit and release.
- Remember to check cleat wear regularly. When the cleats are worn, replace them and adjust the holding force of the cleat before riding and after replacing the pedal cleats. If you do not heed the above warnings, the shoes may not slip out of the pedals when you want them to, or may slip off unexpectedly or accidentally, resulting in serious injury.
-If the reflectors are dirty or damaged, do not continue riding the bicycle. Otherwise, it will be difficult for oncoming vehicles to spot you.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html