SHIMANO Battery Di2 BT-DN3001 built-in 3-port

Waterproof, lithium-ion battery BT-DN300 with the option of mounting in the seat post or frame. Same size as BT-DN100. Capacity: 500 mAH. The battery has three power ports compatible with the new generation EW-SD300 cables.
Technologies used: E-tube

Type: UNI, Total package weight: 129g, Internal, black, Di2

Safety notice
WARNING
Information about installation, setup and replacement of products not found in the user manual manual, will be provided to you at the point of purchase or at the distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

DANGER
- Use the specified charger to charge the battery. Use of any other equipment may result in fire, overheating or leakage. For details on compatible battery chargers, please refer to the "Product Range" section of our website (https://productinfo.shimano.com).
- Use a power adapter with a USB port with a voltage of 5.0 V DC and a current of at least 1.0 A DC. If you use an adapter with a current rating of less than 1.0 A, the AC adapter may heat up and cause fire, smoke, heating, damage, electric shock, or burns.
- Do not heat the battery or throw it into a fire. Failure to do so may result in fire or rupture.
- Do not use or leave the battery in hot or humid places where the battery may be exposed to direct sunlight, in a closed vehicle on a hot day, or near a heater. Failure to do so may result in fire, burns, or other injuries due to leakage, overheating, or rupture.
- Do not disassemble or modify the battery; also, do not apply solder directly to the battery terminals. If you do not follow this, leaks, overheating or rupture may result in fire, burns or other injuries. - Do not connect the terminals (+) and (-) with metal objects. Do not carry or store the battery together with metal objects such as chains or hair clips. Failure to do so may result in short circuits, overheating, burns or other injuries.
- Do not connect the terminals (+) and (-) with metal objects. Do not carry or store the battery together with metal objects such as chains or hair clips. Failure to do so may result in short circuits, overheating, burns, or other injuries.
- If liquid leaking from the battery gets into your eyes, immediately flush the affected area with water without rubbing your eyes, and then seek medical help. Failure to do so may result in blindness.

WARNING
- If the battery is not fully charged after 4 hours of charging, stop charging.
- Do not immerse the battery in fresh or salt water and prevent the battery terminals from getting wet. Failure to do so may result in fire, rupture, or overheating.
- Operating temperature ranges for the battery are listed below. Do not use the battery at temperatures outside these ranges. If the battery is used or stored at temperatures outside these ranges, fire, injury, or operational problems may occur.
1. During discharge: -10 °C - 50 °C
2. During charging: 0 °C - 45 °C
- Do not expose this battery to extremely low air pressure. Doing so could cause the battery to explode or leak flammable liquid or gas. Air transport of this battery is not a problem.
- Do not use the battery in case of obvious scratches or in case of other external damage. Failure to do so may cause cracking or overheating or problems during operation.
- Do not subject the battery to strong impacts or throw it. Failure to do so may cause cracking or overheating or problems during operation.
- Do not use the battery if it shows leakage, discoloration, deformation or other unusual signs. Failure to do so may result in cracking or overheating or problems during operation.
- If the leaking fluid touches your skin or clothing, clean them immediately with clean water. Leaked liquid may damage the skin.
- After reading the user manual carefully, store this manual in a safe place for possible future use.

WARNING
- Follow all federal, state and local environmental regulations when disposing of this battery. Disposing of this battery in a fire or furnace or mechanically crushing or cutting it may cause the battery to explode.
- Keep out of reach of children.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html