SHIMANO Road pedals PD-EH500 SPD one-sided + SM-SH56

Road SPD pedals PDEH500 are suitable for recreational and tourist riding. Pedals and one-sided SPD lock and flat platform with pins from the other side. Possibility to adjust the preload of the lock force for clamping and loosening the treadle. Includes SM-SH56 stoppers for multi-directional cleat release.

Type: UNI, Total package weight: 383g, Use: ROAD/FHB, single-sided, SPD, dark gray, with SM-SH56 stoppers, Material: pedal body (aluminum), axle (chrome+steel)

Safety notice
CAUTION
Information on installation, setup and replacement of products not found in the user manual will be provided to you at the place of purchase or distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- To ensure the safety of children using this product, children should be instructed on proper use after both guardians and children have fully understood the following information. Failure to follow these instructions may result in serious injury.
- Do not disassemble or modify the product. It may cause the product to malfunction, you may fall unexpectedly and seriously injure yourself.
- Be careful when using the pedals in competition or aggressive riding. The cleats can accidentally come loose from the pedals and you can fall off the bike. These pedals are for recreational use and are therefore designed to be easier to engage and release from the cleats than SPD pedals.
- Before attempting to ride with these pedals and cleats (on shoes), make sure you understand the operation of the locking/release mechanism on the pedals and cleats (on shoes). SPD pedals are designed to release only when needed. They are not designed to release automatically when you fall off the bike.
- Only use SPD shoes with this product. Other types of shoes may not release from the pedals or may release unexpectedly.
- Use only SHIMANO cleats (SM-SH51/SM-SH56) and securely tighten the mounting screws to the shoes. Failure to tighten the screws securely may result in a fall where the cleats do not release.
- Before attempting to ride with these pedals and cleats, apply the brakes, then put one foot on the ground and practice engaging and releasing each cleat from the pedal until you can do it automatically with minimal effort.
- Ride on a flat surface first until you learn how to engage and release stops from the pedals.
- Before driving, adjust the holding force of the stops on the pedals according to your needs. If the holding force of the stop on the pedals is small, the stops may accidentally come loose, you may lose your balance, and you may fall off the bicycle. If the holding force of the stopper on the pedals is large, the stoppers may not be released easily.
- When driving at low speed or when there is a possibility that you will need to stop (e.g. when making a full turn, at an intersection, when driving uphill or turning a sharp corner), release the stoppers from the pedals in advance so that you can quickly put your feet on the ground if necessary.
- While riding in in adverse conditions, use less cleat holding force to attach pedal cleats.
- Keep cleats and binding free of dirt and debris to ensure proper fit and release.
- Remember to check cleat wear regularly. When the cleats are worn, replace them and adjust the holding force of the cleat before riding and after replacing the pedal cleats.

If the above warnings are not followed, the shoes may not slide out of the pedals when you want them to, or may slip off unexpectedly or accidentally, resulting in serious injury.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan Phone number: +81-72-223-3210 / FAX:+81-72-223-3258 WEB: shimano.com Email: contactshimano@shimano-eu.com EU representative: Shimano Europe BV High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html