SHIMANO Front hub XT HB-M8000 32d. black Center lock

DEORE XT M8000 front hub. MTB hub, 32 holes, intended for use with a Center Lock disc. OLD 100mm. Refined hub sealing for long life. Classic hub design with cones for easy setup and service. Polished ball tracks on cones and hubs for smooth operation and low rolling resistance. Lightweight aluminum alloy quick release (lever).

Type: MTB, Total package weight: 164g, 32 holes, Front, black, Mounting method: Quick release, Center Lock, Material: Aluminum

SHIMANO DEORE XT. Performance, dynamism and determination. Efficient power transmission thanks to DYNA-SYS and Rider-Tuned technology. DEORE XT components have been specially designed for XC/enduro/all mountain and full-suspension bikes with large wheel diameters where extreme strength and reliability of each component is required in any weather conditions.

Safety Notice
CAUTION
Information on installation, adjustment and replacement of products not found in the user manual will be provided to you at the place of purchase or at distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- This wheel is equipped with a hub with a quick release that facilitates installation and removal. Failure to properly install this quick release (wheel) hub on the bicycle may cause the wheel to detach from the bicycle while riding resulting in serious personal injury.
- Use a front fork equipped with a wheel retention mechanism.
- CAREFULLY READ THE INSTRUCTIONS FOR THE QUICK RELEASE HUB IN THE OWNER'S MANUAL BEFORE USE. If you have any questions, ask your dealer. INCORRECT INSTALLATION OF THE HUB CAN RESULT IN SERIOUS PERSONAL INJURY.
- Before riding the bicycle, check that the wheels are securely fastened. Improper use of the quick release lever can cause the wheel to fall off, etc. and may result in serious injury from a fall.
- If the quick release mechanism is not used correctly, the wheel may fall off the bicycle and serious injury may result. Please read the operating instructions for the quick release mechanism carefully before use.
- If the quick release lever is on the same side as the disc brake rotor, there is a danger that it may interfere with the disc brake rotor. Check that even after tightening the quick-release lever with your palm with full force, the quick-release lever does not interfere with the disc brake rotor. If the lever interferes with the disc brake rotor, stop using the wheel and consult your dealer or representative.

WARNING
Tighten and loosen the quick release lever only with your hands. Never use any tools to tighten the quick release lever, e.g. hammer as damage may occur.

Note
- Do not apply any oil to the inside of the hub. Otherwise, the lubricant will leak out.
- When cleaning the hubs, use a neutral detergent. Other cleaning agents can damage the cartridges. Do not clean any areas that are not allowed to be cleaned according to the instructions.
- Do not clean the hub areas with a high pressure cleaner. Water may enter the hubs, which may reduce performance. The product warranty does not cover natural wear and tear due to normal use and aging. We recommend using SHIMANO brand lubricants and maintenance products for maximum performance. Manufacturer Information Shimano INC 3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577. Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html